3D Printing Webinar and Occasion Roundup: October 30, 2022 – 3DPrint.com


We’re ramping up once more on this week’s roundup, with a number of occasions happening, together with ICAM 2022, DEVELOP3D Dwell, ASME’s AM Medical Summit, and extra. When it comes to webinars, Stratasys and 3D Methods every have two this week, Nexa3D will discuss growing its XiP printer, 3DHEALS welcomes panelists to debate point-of-care 3D printing, and extra.

October 31 – November 4: ASTM ICAM 2022

The seventh annual ASTM Worldwide Convention on Additive Manufacturing (ICAM 2022), sponsored by ASTM’s Additive Manufacturing Heart of Excellence (AM CoE), will probably be held in-person from October thirty first to November 4th in Orlando, Florida. Associated to certification, standardization, and qualification, with an emphasis on industry-specific necessities that deal with the complete AM course of chain, ICAM will welcome consultants from around the globe for keynote speeches, panel discussions, technical shows, sponsored displays, networking receptions, and extra. Moreover, the Pupil Presentation Competitors, Younger Skilled in AM awards, and ASTM Worldwide Additive Manufacturing Awards of Excellence in Training, Analysis, and Standardization will happen. 3DPrint.com was at ICAM final 12 months, and we’re again once more for 2022!

“As AM applied sciences are adopted by varied industries, establishing feedstock-process-structure-property-performance relationships turns into important for qualification and certification of components in security essential purposes. This convention addresses software particular necessities of assorted {industry} sectors along with protecting the basics of AM course of chain.”

You’ll be able to register for ICAM 2022 right here.

October 31 – November 4: 3D Printing Information Unpeeled

Our Govt Editor Joris Peels, who’s additionally the Vice President of Consulting at SmarTech Evaluation, launched a day by day information livestream known as 3D Printing Information Unpeeled. Every weekday at 9:30 am EST, Peels will get on LinkedIn Dwell and tells us, in 20 minutes or much less, what he considers to be the high information tales from the 3D printing {industry} that day, and why they’re necessary. A number of the tales in his roundup are ones we’ve coated at 3DPrint.com, and a few are usually not, however they’re all equally attention-grabbing and impactful.

The subsequent 3D Printing Information Unpeeled livestream will probably be this Monday, October thirty first, at 9:30 am EST, and can proceed the remainder of the week on the identical time. You don’t wish to miss it!

November 1 – 3: ASME’s AM Medical Summit

The AM Medical Summit, powered by ASME, returns to Minnesota November 1-3 to deal with the AM {industry}’s greatest medical challenges via collaboration and case examine technical classes. The summit is co-located on the Minneapolis Conference Heart with the Medical Design & Manufacturing (MD&M) Minneapolis and VisualizeMED occasions, and its themes will embody medical gadgets, orthopedics, medical modeling, point-of-care manufacturing, and extra. Plus, attendees have the choice to tour the Mayo Clinic and the College of Minnesota.

“The AM Medical Summit, powered by ASME, is the solely occasion devoted to medical additive manufacturing and 3D printing – rising purposes in medical system, point-of-care manufacturing, dental, orthopedics, biofabrication, verification and validation, medical modeling and extra.”

You’ll be able to register for the summit right here.

November 1: DEVELOP3D Dwell

On Tuesday, November 1st, DEVELOP3D, a publication with its personal voice devoted to product improvement, design, and CAD, will host its DEVELOP3D Dwell occasion within the UK. The occasion itself will probably be held on the College of Sheffield, and the entire primary stage shows will probably be streamed dwell for audiences around the globe, protecting matters associated to the way forward for design and manufacturing, from audio merchandise and robots to sports activities automobiles and extra.

“We’ll have over 60 of the main product improvement expertise companies, providing you with the distinctive alternative to get fingers on with the newest improvements multi function place.

“And our free multi stream convention provides you with unimaginable perception into how main design, engineering and manufacturing companies are implementing revolutionary new applied sciences and pushing the boundaries of what’s attainable.”

You’ll be able to register for the in-person occasion right here and the livestream model right here.

November 2 – 3: TriMech’s International Know-how Occasion

TriMech is holding a free International Know-how Occasion and SOLIDWORKS 2023 Launch on November 2nd and third, providing the newest in 3D design, cloud collaboration, and manufacturing. There will probably be over 25 digital expert-led classes, and attendees can get their questions answered by the consultants and exhibitors, discover the occasion to win prizes, work together with the worldwide SOLIDWORKS neighborhood, and extra. Periods will run from 9 am to 1 pm EST, after which once more from 1 to five pm EST.

“The agenda options two tracks of content material that can run on the identical time, you possibly can bounce out and in of those tracks at any time to attend the classes most related to you. Moreover, all classes will even be accessible on-demand for 30 days after the occasion.”

You’ll be able to register for the occasion right here.

November 2 – 3: Superior Engineering 2022

Additionally from November 2nd to the third, Superior Engineering 2022, the UK’s main gathering of OEMs and engineering provide chain professionals, will probably be held in Birmingham. The occasion celebrates collaboration, innovation, and sustainability inside the engineering and manufacturing industries, and is free to attend. Present zones embody composites engineering, superior metals, area and satellite tv for pc, testing and high quality management, and extra.

“Engineering professionals from all sectors can community, be taught and uncover revolutionary new options and suppliers from the engineering provide chain throughout two action-packed days.”

You’ll be able to register for the occasion right here.

November 2: Copper Additive Manufacturing

That includes technical consultants from 3D Methods, NASA, and Elementum 3D, Deep-Tech Showcase is holding a webinar on “Pushing the Limits of Copper in Additive Manufacturing” on Wednesday, November 2nd at 11 am EST. Displays by these specialists will concentrate on the potential copper affords when designed and produced in an additive manufacturing surroundings, and attendees will hear worthwhile real-world insights concerning the materials’s rising capabilities within the AM market, in addition to its impression on thermal administration and rocket propulsion purposes, and have the possibility to ask questions as effectively.

“On this dwell occasion be part of specialists for a briefing of the transformative developments additive manufacturing (AM) is having on copper purposes. The shows will disclose essentially the most present knowledge and real-world options to copper materials/printing course of improvement and copper purposes within the rocket propulsion and thermal administration industries.”

You’ll be able to register for the webinar right here.

November 2: Stratasys Affords FDM Product Replace

Stratasys is internet hosting a web based “FDM Product Replace for Elements Suppliers” at 12 pm EST on the 2nd. The audio system will probably be Allen Kreemer, Senior Strategic Purposes Engineer, and Perry Hubbing, Senior Mission Engineer, each from Stratasys.

“Product replace of recent product choices in FDM for components suppliers. Overlaying F770, F370CR, and T40 slice thickness for Ultem9085 and N12CF.”

You’ll be able to register for the webinar right here.

November 2: Dialogue on EV Design & Manufacturing Developments

Additionally on November 2nd at 12 pm EST, 3D Methods is co-sponsoring a roundtable dialogue, together with Sandvik Coromant, about “Developments within the design and manufacturing of electrical automobiles.” Scott Value, Section Supervisor – Transportation & Motorsports, will probably be talking on behalf of 3D Methods.

“Panelists will provide unique insights and talk about:

  • The state of electrical automobile (EV) and autonomous automobile (AV) markets, together with updates from the aerospace world, reminiscent of city transport and drones

  • Figuring out progress alternatives in eMobility

  • Methods to stability manufacturing of conventional powertrain components with eMobility parts

  • Instruments that may assist producers transition to the way forward for the mobility market

You’ll be able to register for the webinar right here.

November 2: Finish-Use Elements Manufacturing with Stratasys & Materialise

The ultimate 12 pm EST webinar on Wednesday the 2nd will probably be centered on “Unlocking AM: The Way forward for Finish-Use Half Manufacturing,” a joint panel by Materialise and its CO-AM accomplice Stratasys. Panelists from Materialise and Stratasys, in addition to Sikorsky, Common Atomics, and ABI Analysis, will talk about digital manufacturing and the way it permits end-use half manufacturing.

“Our panelists will delve into a number of matters surrounding end-use half manufacturing together with half validation, predictive upkeep and construct simulation. These core matters are very important for the way forward for additive manufacturing.”

You’ll be able to register for the webinar right here.

November 2: Creating Nexa3D’s XiP

Nexa3D engineers and Xometry consultants will talk about the event of the XiP, a desktop 3D printer with industrial-level velocity, and the way it occurred in simply 18 months, in “From Sketch to SKU: Creating XiP, the World’s First Ultrafast Desktop 3D Printer,” this Wednesday at 2 pm EST. Attendees will be taught concerning the product improvement and prototyping of the XiP, how the businesses collaborated to cut back and offset the carbon footprint of their manufacturing efforts, and extra.

“A challenge of this enterprise would usually have taken years to finish, however Nexa3D turned to Xometry to cut back the lead time from idea to business product. Xometry used AI-powered applied sciences, its various provider community, and a devoted crew of subject material consultants to assist the crew at Nexa3D deliver the XiP printer to market rapidly and affordably.”

You’ll be able to register for the webinar right here.

November 2: DfAM Occasion by HP & Altair

The final November 2nd webinar, held at 2 pm EST, will probably be a joint HP 3D Printing and Altair occasion all about design for additive manufacturing, or DfAM. The in-person occasion will probably be held at Automation Alley in Troy, Michigan, and can embody discussions from Altair, HP, and Gonzalez Group consultants, in addition to a tour of the Gonzalez services to see how the corporate is utilizing additive to consolidate components, cut back weight, and shift some tooling on their manufacturing traces from metallic to polymer.

“Advances in additive manufacturing applied sciences have launched new challenges in design. Our potential to print advanced geometries has outpaced our potential to design them. Hear from {industry} consultants how new design strategies are reshaping the way forward for innovation and digital transformation.”

You’ll be able to register for the webinar right here.

November third: Changing into an SLS Open Parameters Professional

Sinterit will talk about “The right way to develop into an SLS open parameters PRO” in a webinar at 11 am EST on Thursday, November third. Attendees will hear from Sinterit consultants Jakub Malec and Dominik Stasiak about how one can develop into an SLS professional consumer and print huge numbers of printouts and moveable components with prime quality, the highest parameters you have to know to develop into extra versatile, and extra.

“Changing into Sinterit’s SLS 3D printing resolution consumer is extraordinarily straightforward, because the printing course of is as intuitive as attainable. It’s why we encourage you at present to make one other step and develop into a proficient consumer by studying how one can use Sinterit’s open parameters.

“Whereas most compact SLS 3D printers in the marketplace work in a plug&play mode,Lisa, Lisa PRO, and Lisa X are usually not an exception. However with open parameters, they go one step additional, turning into cutting-edge gadgets and giving their customers extra choices to discover.”

You’ll be able to register for the webinar right here.

November 3: Level-of-Care 3D Printing Panel

Lastly, additionally at 11 am EST on the third, 3DHEALS wraps the week up with a digital panel on “Level of Care 3D Printing.” On the finish of 2021, the FDA revealed a dialogue paper with regards to POC 3D printing, and invited the general public to submit feedback with the intention to create extra clarifying regulatory steering. So for this panel, 3DHEALS invited a number of consultants with each industrial and medical experiences in POC 3D printing to debate the thrilling subject.

“Level of care 3D printing is turning into one of many greatest sights in adopting 3D printing in healthcare methods as a result of it demonstrates the flexibility to decentralize manufacturing personalised medical gadgets. The medical gadgets can vary from anatomical modeling, and implants, to surgical guides based mostly on the newest updates from all around the world. Nonetheless, for corporations fascinated with increasing markets both domestically or regionally, understanding the advanced relationships amongst totally different gamers and rules are essential.”

You’ll be able to register for the dialogue right here.

Do you’ve gotten information to share about any future webinars or digital and dwell occasions? Please tell us!





Source_link

Leave a Reply

Your email address will not be published.